BioPro HSD

Heavy Duty Hard Surface Degreaser
BioPro HSD is a heavy duty alkaline aqueous
degreaser and cleaner for stubborn soilage
on all types of hard surfaces and metals. Can be used manually or through pressure washer/scrubber
dryer machines. Extremely effective in
component washing systems, agitation
baths and ultrasonic equipment's where high standards of cleanliness are required for finished parts.

BioPro QB

Quick Break Degreaser
BioPro QB is a powerful yet safe, aqueous
degreaser and cleaner specifically designed
for routine maintenance cleaning and general removal of oil, greases, fats and general soilage. It contains fully biodegradable surfactants that exhibit quick-splitting characteristics allowing
rapid separation of emulsified oil, giving clear water discharges and improving performance of oil separators and interceptor systems.
BioPro QB Degreaser will not affect painted
surfaces and is effective on untreated concrete surfaces, petrol station forecourts machinery, floors and walls.

BioPro RI

Degreaser with Rust Inhibitor for
Component and Parts Washers
BioPro RI is a powerful yet safe low-foam
pH neutral aqueous degreaser and cleaner
with the added benefit of rust inhibition for
use on ferrous metals, cast iron and any
materials prone to flash rusting. It is extremely
effective on all types of surfaces contaminated
with oils, hydrocarbons, grease, fats and general soilage. It is effective on untreated concrete surfaces, petrol station forecourts, machinery
floors, walls etc as well as manufactured
components in deburring and washing
systems. It will not affect painted surfaces.

BioPro RI has been extensively tested
by Guyson International of Skipton and is
approved for use in their range of aqueous
washing systems and Marr Parts Washing Machines.

For further information on the range of equipment available go to www.guyson.co.uk.

BioPro Citrus Degreaser

Natural Solvent Degreaser
BioPro Citrus Degreaser is a high performance
product based on natural solvent extracted from the peel of citrus fruit and advanced surfactant technology to provide a safe, fully biodegradable product, which is water soluble and ideal to use on any type of surface. A safe replacement for traditional hydrocarbon
and chlorinated solvents, suitable for
floors, walls, worktops, machinery, oven tops
painted surfaces, tiles, metals and plastics.
It can be used to remove stains, lime-scale and body-fats from showers, inks, tars, oils and grease, leaving a pleasant fragrance after use. Highly effective in areas prone to foul odours such as drains, waste chutes and refuse skips.

Safety Solvent Cleaner

Safe Hydrocarbon-based Solvent for Precision Cleaning
Safety Solvent Cleaner is a highly refined
blend of aliphatic hydrocarbons which can
be used as a safe alternative to traditional 111 Trichloroethane-based solvent degreasers for precision cleaning where rapid drying is not a critical requirement. Does not contain any ozone
depletants, is non-toxic and has a high flash point of 60°c. It is effective on oils and greases leaving surfaces clean and residue-free when dry. The evaporation rate can be significantly increased with the aid of warm air circulation. Safe on metals, alloys, plastics, electronic and electrical components, motor windings printed circuit boards, elastomers, most rubbers and painted surfaces including chlorinated rubber finishes.